Mold remediation in Pittsboro, IN

New homes with moisture problems

Some of the calls we get from newer Hendricks County subdivisions involve homes only a few years old. Tight construction keeps heating and cooling costs down, but it also keeps moisture in. Showers, cooking, laundry and a humidifier left running through the winter can push indoor humidity high enough for mold to grow on window frames, in closets on outside walls, and in attics above bathrooms whose fans vent into the attic instead of outdoors.

Our answer on how humid an Indiana home should be gives targets for each season. If mold has already started, testing shows how far it has spread and whether it’s limited to one room.

Basements in newer homes deserve a look too. A sump pit in an unfinished corner is easy to forget until it overflows, and a finished room next to it can take on water under the carpet before anyone sees it.

Older and rural properties

Around town and on the county roads outside it, older homes bring different problems. Crawlspaces with bare dirt floors, block basements that seep in spring and roofs that have been patched more than once are all common sources. We check those areas directly, measure moisture in the framing and take air samples in the living space. Our crawlspace mold in Indiana page explains our approach below the floor.

Detached garages, barns and workshops can matter too if they share air with the house or hold belongings that later come inside. We’ll tell you what’s worth testing and what isn’t.

Why being close helps

Because Pittsboro is near our office, it’s simple for us to come back for follow-up testing or to look at a problem area after a big storm. On projects where a roofer or plumber has to fix the water source first, we can pause and return without a long gap. Every project still follows the same steps: testing, a written scope, contained removal, and clearance testing to confirm the result.